C-140 Quad slew limiter module for Eurorack / Doepfer A100 system.

If you want to use gates for opening VCAs directly you may get a lot of clicks. This quad lag can be used to smooth the edges of a gate effectively removing such clicks. There are four on-board trimmers to adjust slew times individually up to 10ms. There are also three jumpers which allow the signal from the previous channel’s output to be normalled to the next input (chaining channels). If all jumpers are set and a gate signal is sent to the input on ch1, the output signal lag time will be gradually increased on outputs 1,2,3 and 4. In this manner, the outputs can be used for simple checking if your VCA requires longer slew times simply by using the summed lag times out 2, 3 or 4. Removed jumpers disconnect any normalling between channels. In this case, there are four independent slew channels, each with its own trimmer for setting lag time.

Width: 4TE/ 4HP/ 20mm
Depth: 35mm /1,4″ max.
Current: 5mA
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.