S-186 Dual trig/gate delay module for Eurorack / Doepfer A100 system.

From top:
ch1 input jack + LED
ch2 input jack (normalled to ch1) + LED
ch1 delay time knob
ch2 delay time knob
original (dry) input to output button + LEDs
ch1 output jack + LED + sum LED (summed ch1 + ch2 outputs if jack is not plugged into ch2 output jack)
ch2 output jack

Delay time 0 to 2s (jumper removed, resolution 700us) or 0-7s (jumper set, resolution 2ms).

There can be an „non-rhytmic“ output at moment of changing delay time. Memory is read at different ratio (faster or slower) to ensure no trig/gate is lost. If delaytime change is made with active trigger/gate this trigger/gate can be held active for a while (until desired delay time is reached).

Imagine an tape recorder with fixed tape speed and recording and play heads in some distance (=set delay time). If distance is increased delay time increases too, if distance is lowered delay time is shorted.
At time of head movement there can be „non-rhytmic“ artifacts because play head meets recorded triggers more often (than they was recorded) and play them at higher speed (and they may be shorted too of course).
If time is increased (play head is moved away from rec head almost with tape) and at this moment is recorded gate present this gate will be played for longer time than was recorded.
Because there is limited speed of „head movement“ (speed of delay time change) delay time cannot be changed abruptly. This ensures all recorded trig/gates will be played (no one will be skipped or lost).

Width: 4TE/ 4HP/ 20mm
Depth: 38mm /1,5″ max.
Current: 25mA (no need for +5V supply)
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.