F-250 Resonator module for Eurorack / Doepfer A100 system
Consists of three manually tunable state variable filters (tunable in high/mid/low frequency band). Low band tuning range approx. 50-300Hz, mid band range approx. 250-1500Hz, high band range approx. 1,3-8kHz. Each band with adjustable gain, resonance (Q) and frequency. Outputs of these three filters are mixed to outputs: high-pass outputs of all three filters are mixed to HP out, low-pass outputs are mixed to LP out, band-pass outputs are mixed to BP1 and BP2 outputs. BP1 mixes all three bands in phase, BP2 mixes hi/lo bands in phase and mid-band out of phase (inverted/antiphase). Filtered outputs can be mixed on external mixer yet. Set band gain carefuly, too much gain will make poor results.
Width: 8TE/ 8HP/ 40mm
Depth: 60mm /2,4″ max.
Power cable included
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.