C-212 ADSR envelope generator with nornal and inverted output for Eurorack / Doepfer A100 system.

Gate input jack
Attack time, Decay time, Sustain level and Release time knobs
Inverted envelope output jack + LED and normal envelope output jack + LED.

Minimum envelope time under 1ms (at 9 o´clock about 100ms, 12 o´clock about 1s, 3 o´clock about 16s), several hours at max.

Internal jumpers for 5V envelope (jumper set near power cable connector) or 10V envelope (jumper set near jacks), just one jumper must be set. Another jumper for retrigger (“regate/retrig”) from zero (if previous envelope is still running). Jumper not set =  retrigger from actual envelope value, jumper set = retriggers always from zero).
P-060 – switches can be used for switching from front panel.

Width: 4TE/ 4HP/ 20mm
Depth: 45mm /1,8″ max.
Current: 20mA (no need for +5V supply)
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.