Voltage controlled delay and pulse width.
Delay range 0 to 5s, width 1ms to 5s (max. 5s delay + 5s gate).

New input pulse resets timing so maximum delay time is limited by input pulse rate (time between input pulses).
Knobs for manual time settings (if jack not plugged in) or as CV amount (jack plugged in).

Width: 4TE/ 4HP/ 20mm.
Depth: 40mm /1,6″ max.
Current: 20mA (from +12V rail, no need for 5V power)
Handy 20cm (8″) power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.