C-015 Gateable slew limiter (lag) for Eurorack / Doepfer A100 system.

Gate input jack
Switchable up/both/down edge slewing
Lag time knob
Exponential (LED off) or linear (LED on) response
Slew time range short (LED off) or long (LED on)
“Slew currently active” – “S” (LED on)
Manual gate button and gate input jack (active gate = LED on)

Max. slew times: lin/short 25ms/oct, lin/long 200ms/oct, exp/short 800ms, exp/long 8s.

Response to gate signal (button or input signal) can be inverted:
gate active = slew active (gate not active = slew disabled) or inverted
gate active = slew disabled (gate not active = slew active)

In normal mode both “S” and gate LEDs lights together (active gate=active slew), in inversion mode lights just one LED alternately (no gate = active slew, active gate = no slew). Inversion gate mode can be switched by pressing top two buttons together (exp and range).
So permanent slewing can work WITHOUT bottom gate signal (in this mode active gate currently disables slew)

Width: 4TE/ 4HP/ 20mm
Depth: 60mm /2,4″ max.
Current: 25mA (no need for +5V supply)
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.