2ch balanced line outputs converting Eurorack levels to (adjustable) line levels.
From the top down:
Channel A
input 1/8″ jack (modular level)
output level knob
output 1/4″ jack (balanced, adjustable/line level)
4-LED level meter (-20/-6/0/+3dB or +6dB – jumper selectable)
Channel B
4-LED level meter (-20/-6/0/+3dB or +6dB – jumper selectable)
input 1/8″ jack (modular level)
output level knob
output 1/4″ jack (balanced, adjustable/line level)
On board settings (see picture):
– ground lift jumpers for balanced outputs (jumper header set = grounded, removed = gnd lift)
– jumper for last LED indicating +3dB or +6dB level (jumper header set = +3dB, removed = +6dB – nearly overload),
– jumper for dot/bar meter mode (jumper header set = dot mode, removed = bar mode)
– meter calibration trimmers
Frequency range: 15Hz to 60kHz (-1dB), 10Hz to 80kHz (-3dB)
THD+N: better than 0,01%
Input impedance 100kOhm, AC coupled
Width: 4TE/ 4HP/ 20mm
Depth: 62mm /2,5″ max.
Current: 70mA max. in bar mode, 50mA max. in dot mode
Power cable included
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.