U-011 CV amplifier/shifter (4HP)


DSCN6538_u-011

U-011 Amplifier/shifter utility module for eurorack / Doepfer A100 system.

Swiss knife for CV manipulation: offsetting (transposing) / CV tracking variation (0-to-2V/oct) / amplifying (x0 to x2) + extra inverting putput (negative slopes, negative tracking…)

From top:
CV input jack with input signal polarity LED
Amplification (tracking) coarse
Amplification (tracking) fine
Shift/offset (transpose) coarse
Shift/offset (transpose) fine
Normal out jack + LED
Inverted out jack + LED

Shifting about 2V (2 octaves), tracking (amplifying) up to 2x (1V CV input = 0-2oct output).
Output can be inverted by switch (inverted envelopes, inverted tracking -x oct/V or so…)

Width: 4TE/ 4HP/ 20mm.
Depth: 40mm /1,6″ max.
Current: 15mA max.
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order CV amplifier/shifter U-011 CV amplifier/shifter @ £39.00