U-032 Gate-to-trig converter with trig level limiter module for Eurorack / Doepfer A100 system.

From the top down:
limit voltage knob
limit CV input jack + LED
three channels for gates to trigs conversion (in jack, out jack, LEDs)

U-032 Gate-to-trig converter converts gates to trigs and limits trigger voltage using knob setting or input CV for limit voltage. Higher voltage (knob or CV) is used for limitation (“higher wins”).
This arrangement easily allows generation of “accent” using an gate signal (say if knob is set to 3V, incomming  5V gate allows temporary voltage increase of generated trigs).
Output trig voltage cannot be higher than input gate voltage.

Width: 4TE/ 4HP/ 20mm.
Depth: 40mm /1,6″ max.
Current: 15mA max.
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.