B-011 Sequential logic module for eurorack / Doepfer A100 system.

From top:
S/data input jack + LED
R/clock input jack + LED
RS flip flop: output (Q) and inverted output jacks + LEDs
D flip flop: output (Q) and inverted output jacks + LEDs
T flip flop: output (Q) and inverted output jacks + LEDs

Flip flops/latches are driven by rising edges.
RS (reset/set): rising edge of incomming trig/gate sets (S) or resets (R) output
D (data): risisng edge of incomming trig/gate in CLK input rewrites current state of DATA input to output
T (toggle): output is toggled at rising edge of CLK input only when DATA input is active

Input threshold (log.0/1) is about 0,7V, output level is 0V/5V (log.0/1)

Width: 4TE/ 4HP/ 20mm.
Depth: 40mm /1,6″ max.
Current: 15mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.