S-190 Clock distributor (8HP)


DSCN6141_S-190

For chaining/paralleling up to eight 8-step sequencers. Adjustable sequence length, 16 distribution modes.

Labeling shows number of modules in one chain, “M” means “mult”.

S-190_buttons_rev.c_
Next explanation suppose sequence length set to 8 steps:

“8” means eight 8-step sequencers in row (gradually 8 ticks on every output 1-8 so 64 steps).

“332” means 3 sequencers in row, paralleled with another 3 sequencers in row and another 2 sequencers, so you can get 24+24+16 steps. If you have 5 sequencers you can use outputs 4,5,6 and 7,8 to get 24+16 steps. To chain two sequencers use any mode with “2” and use appriopriate outputs.

“42M” means 4 sequencers in row (clock outputs 1-4 gradually) + 2 sequencers in row (outs 5&6) + rest (outs 7&8) are “mult” outs (every clock copied on outputs) so 32+16+8+8 steps.

But sequence length can be set from one step to eight step… Slave sequencers will advance set number of steps. Unbeliavable number of combinations and patterns…

Short press set sequence length, long press sets mode in current column.

Long press of buttons 1&8 together switches between left and right mode column (more sequencers/more steps – left column, smaller number of sequencers/shorter sequences – right column)

 

Width: 8TE/ 8HP/ 40mm.
Depth: 55mm /2,2″ max.
Current: 20mA (from +12V rail, no need for 5V power)
Handy 20cm (8″) power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Clock distributor S-190 Clock distributor @ £80.00