S-230 Shuffled grid module for Eurorack / Doepfer A100 system.

From the top down
left column:
clock input + LED
reset input + LED
setting button + 2 LEDs (short press sets trigger memory, long press sets trigger length)
retrig button + LED
swing knob + CV input jack
output jack + LED

right column:
four channel inputs and outputs with LEDs

S-230 module can add swing to your sequences according to swing button setting and CV input. Bottom output jack in left column provides modified (shuffled) clock. Same swing can be added to up four input triggers (right column). If trigger memory is off input channel signal must be present at moment of input clock to generate appropriate channel trig output (triggers are generated while input gate is on). If trigger memory is on, rising edges of input triggers (or gates) are memorized and appropriate output trig is generated in clock “grid” (regular if swing is set to zero or swinged according to swing setting). This allows generation of trigs aligned to clock (straight or shuffled) from uncorelated signals (say free running LFOs or something). Generated trigs are 1/2/5ms long (set by long button press, underlined). In retrig mode next trigger is generated (with next clock) if input lasts “on” even when clock ends. Input gates are converted to trigs according to trig len setting (long button press).

Width: 8TE/ 8HP/ 40mm
Depth: 45mm /1,8″ max.
Current: 25mA
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.