S-050 Voltage controlled 2-channel Clockworks (clock divider).
Division ratio from /1 to /12 (/1, /2, /3, /4, /5, /6, /7, /8, /9, /10, /11, /12):
Manual: ccw = division ratio 1, cw = division ratio /12
Control voltage: 0V = division ratio 1; 5V = division ratio /12
Knobs are used for manual division ratio setting (if no CV jack plugged) or for CV amount setting.
Fixed 1ms output trig length, input clock rate can be up to 1kHz (due 1ms trigger length).
Outputs can be easily summed using P-110 Gate/trig switchable combiner to get combined unregular trig/gate output(s).
Width: 4TE/ 4HP/ 20mm.
Depth: 42mm /1,7″ max.
Current: 20mA (from +12V only)
Power ribbon cable included (handy 20cm, 16/10pin).
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.