S-080 Resetable divider

Divides input signal (clock, audio…) in selectable ratios (/2 to /16, /4 to /32, /8 to /64), other parameters configurable too.

Configurable parameters (by internal jumpers):
a) jumper 1: 1ms trig outputs (jumper set) or output gate length according to input gate length
b) jumper 2: jumper set = toggling outputs at each input clock (=gate length is time between pulses, this mode doubles division ratios /4, /6, /8, /12, /16, /24-32, jumper not set = output gate length according to input gate length
in “doubled” division mode /8, /12, /16, /24, /32, /48-64)
c) jumper 3: “normal” – or – “doubled” (jumper set) division ratio (/2, /3, /4, /6, /8, /12 – or – /4, /6, /8, /12, /16, /24-32)
d) jumper 4: initial output state – first clock after reset makes all outputs active (jumper set) or waits for 2nd, 3rd… input pulse to make output active. In other words musical (jumper set) or mathematical (jumper removed) counting.
e) jumper 5: last output jack division ratio setting /12 or /16 (jumper set) and its multiples according to other settings

f) independent “reset” jumper (behind /2 output jack): makes reset and waits for first clock – or – first divided step is made together with reset input instantly (jumper set)

P-060 – switches can be used for switching from front panel.

Reset jack, input trig/gate jack + LED, 6 divided output jacks + LED

Width: 4TE/ 4HP/ 20mm.
Depth: 45mm /1,8″ max.
Current: 25 mA max. (from +12V rail only)
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.