M-110 Mixer module,  AC or DC coupled (jumper switchable) for eurorack / Doepfer A100 system.

Low noise three input mixer in 4HE only (based on low noise IC NE5532).
Can be used for audio or CV mixing. Every channel has internal jumper for DC or AC coupling.
For CV mixing (DC coupled) simply set jumpers or use P-060 – switches for switching from front panel.
For audio mixing you can left jumpers set (DC coupled) or removed (AC coupled inputs=removes DC offsets).
Max amplification is two (2) at max. positions. So if any input signal is 2V p-p, it can be amplified to 4V p-p.
Output is strong enough to drive headphones.

Width: 4TE/ 4HP/ 20mm.
Depth: 35mm /1,4″ max.
Current: 8mA max. (20mA max. if loaded by headphones)
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.