M-133 3ch slider mixer (12HP)


M-133 slider mixer module for eurorack / Doepfer A100 system.

Three input mono mixer, can be used for audio and/or CV (DC coupled).
Freq range: 0Hz(DC) to 80kHz (-3dB point), 0Hz to 20kHz +0/-0,2dB,
THD+N: better than 0,01% (prototype measured 0,006%)
Signal to noise ratio (ref.10V p-p): better than -90dB (prototype measured -95,5dB)
Phase error < 20° @20kHz
Ovld LED starts glowing -3dB bellow clipping
Max. amplification +12dB (input and output sliders at max.)

Simply clean and quiet mixer 🙂

Width: 12TE/ 12HP/ 60mm.
Depth: 35mm /1,4″ max. (incl. attached power cable)
Current: 30mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order 3ch slider mixer