R-240 Analog Shift Register (ASR) module for Eurorack / Doepfer A100 system.

Actually, it is digital, but it stores an analog value in the range between 0-5V. Input CV values are sampled at clock/trigger time (actualy with 2ms delay to allow CV settling) and propagated to an tap output delayed after a number of triggers (1-4). Outputs can be semitone quantized (jumper set).

From top to bottom:
clock (trig) input + LED
CV input 0-5V + range LED
3-position mode switch
four CV outputs

Switch:
FREEZE = values currently memorized are held until power down
ASR = normal operation of a shift register
LOOP = values currently memorized are looped (shifted by trigger), CV input is ignored

Jumper is used to set semitone quantization (jumper set) or unquantized output (jumper removed)

Width: 4TE/ 4HP/ 20mm.
Depth: 48mm /1,9″ max.
Current: 30mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.