S-260 6-to-2 ORer module for Eurorack / Doepfer A100 system

S-260 is logic OR module, 6 inputs, 2 outputs. Every input can be routed to output A, output B, both outputs or none of outputs. Routing is set by three position switch for each input, “A” = signal goes to out A, “B” = signal goes to out B, mid position “X” can route input to both outputs or to none of outputs (=off). Meaning of mid “X” position can be set by button short press (for all inputs). Long button press switches gate and trig modes: in gate mode it works as usual logic OR (one lasting gate “covers” all other channel gates making steady output), in trig mode is short trigger generated everytime when input gate/trig begins (even when one channel is very long gate usualy “covering” other inputs). Lenght of trigger can be set to 2ms or 10ms by holding button for a while in trig mode.

Width: 8TE/ 8HP/ 40mm
Depth: 45mm /1,8″ max.
Current: 40mA max.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.