12ch MIDI to gate converter interface Ladik M-211 for eurorack / Doepfer A100 system.
1.press learn button, LED lights up.
2. play 12 notes (any notes on any channels) and you are done, LED goes off.
Setting and mode are memorized even when switched off.
All outputs can be assigned to any channel/note independently (for example Out1:C1/CH1, Out2:F3/CH5…)
Shipped with MIDI CH1 set, notes „middle C“ to „H“ (midi notes 60-71).
LED blinks if an programmed note is active.
Not need for 5V rack power bus (powered from 12V rail only).
Ralf from Germany is making interesting synth-drived moving things drived by M-211:
Width: 8TE/ 8HP/ 40mm.
Depth: 45mm /1,8″ max.
Current: 18mA (from +12V rail only)
Power cable included.
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.