J-130 Integrator (4HP)


J-130 Integrator module for eurorack / Doepfer A100 system.

From the top down:
CV/audio input jack + overload LEDs (should not light up when in use)
Gain (fine time) knob + time range switch
Init value switch + knob (can be used as output of fixed voltage when pushed)
Overload LEDs for integrator (should not light up when in use)
Offset knob
CV/audio output jack + signal LEDs

The analog integrator, creates triangles from rectangles or “like a sines” from triangles or sine/cosine shifts, can be used in chaos patches of course (what else to expect from integrator?)
There are three time ranges for processing audio (hi & lo) and CV. Try to keep “slowest” range setting while possible to get best integrator action (CV -> LO -> HI)

Width: 4TE/ 4HP/ 20mm.
Depth: 46mm /1,8″ max.
Current: 20mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Integrator