T-110 Timbre modulator (4HP)


DSC_0411_T-110

T-110 Timbre modulator module for Eurorack / Doepfer A100 system.

From top:

– Input jack
– Manual rectifier knob + output jack (rectified signal, rectification amount set by knob) – allows setting of input signal rectification amount continuously from “no” over “half” to “full” rectification (not work with rectangle input signals, needs an sine or triangle or another coherent input signal…). Rectified signal sounds octave higher.
– Initial timbre knob – initial ratio between rectified input (rectification amount set by knob) and square signals
– Envelope/modulation knob + input jack – modulates timbre between rectified and square signal (changes harmonics amount)
– Timbre output jack

Width: 4TE/ 4HP/ 20mm
Depth: 50mm /2″ max.
Current: 20mA
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted. In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

 

 

Order Timbre modulator T-110 Timbre modulator @ £49.00