J-132 Integrator module for eurorack / Doepfer A100 system.

From the top down:
CV/audio input jack + overload LEDs (should not light up when in use)
Gain (fine time) knob + time range switch
Init value trig/gate input + knob
Overload LEDs for integrator (should not light up when in use)
Offset knob
CV/audio output jack + signal LEDs

Almost the same like J-130 but with trig/gate input for resetting to init value (instead of manual button like on J-130).

Width: 4TE/ 4HP/ 20mm.
Depth: 46mm /1,8″ max.
Current: 20mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.