M-160 Mixer module for eurorack / Doepfer A100 system.
Inputs can be AC or DC coupled (for audio or CV) by internal jumpers, 6 input jacks + level knobs, two outputs (A,B).
Low noise design, bandwidth (-3dB points) 20Hz-50kHz (AC coupled), 0Hz-50kHz (DC coupled).
Mixer can be used in different configurations (routed by internal jumpers):
as MONO MIXER:
6 channel mono mixer (to A, B or to both outputs), two independent mono mixers (2in to A + 4in to B or 3in to A + 3in to B), 5ch mono mixer + 1ch buffer/attenuator
as STEREO MIXER:
1 stereo input (L/R) + 4 mono inputs (panned to mid), 2 stereo inputs (L/R) + 2 mono inputs (panned to mid), 3 stereo inputs (L/R), 3 mono inputs pannable to stereo out
as MONO MIXER with AUX:
3 mono inputs (to A – mix out), 3 pre-aux levels (to B – aux out)
config examples:
Width: 8TE/ 8HP/ 40mm.
Depth: 60mm /2,4″ max.
Current: 20mA max.
Power cable included.
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.