A-410 VC Pan/Mix/VCA (4HP)


DSC_0418_A-410

A-410 Voltage controlled Panner/Mixer/VCA module for Eurorack / Doepfer A100 system

From the top:
– signal inputs A&B
– initial A/B ratio knob
– CV (env/modulation) amount knob & input CV jack
– PAN/MIX mode switch
– signal outputs A&B

VC Pan mode (left switch position, left side labels) = one input (A), two outputs (A&B). In Pan mode it can be used as VCA = A input and A output is used only (with init knob set to “B”).
VC Mix mode (right switch position, right side labels) = two inputs (A&B), one output (A).
Module is DC coupled so allows processing CV signals too (not purposed for precise CV tuning, there are an offsets).

Width: 4TE/ 4HP/ 20mm
Depth: 50mm /2″ max.
Current: 25mA
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted. In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

 

Order VC Pan/Mix/VCA