S-010 Clockworks (12HP) – Discontinued


DSCN1363_cw DSCN1356_cw DSCN1357_cw DSCN1358_cw

S-010 Clockworks Eurorack module.

Works as 4 channel analog divider with internal or external clock source.
If external clock is used, clock connector serves as input for external clocking pulses.
If internal clock is selected, clock connector serves as output (can drive other sequencer or Clockworks or anything clocked).
Left switch position = ext. clock, right = internal clock.
Division ratio is selected by potentiometer “Divisor” for every channel in range 1 to 8. This feature can create interesting polyrythms.
Level buttons sets output trigger level 0-8V.

Width: 12TE/ 12HP/ 60mm.
Depth: 55mm /2,2″
Current: 20mA
Power ribbon cable included (handy 20cm, 16/10pin).

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

No longer available. Possible successors are S-020 / S-050 (2ch, 4HP) or 4ch S-030 / S-060 (4ch, 8HP)