U-122 Dual Pedal Control (4HP)

U-122 Dual Pedal Control module module for Eurorack / Doepfer A100 system.

This module allows you to generate gates using sustain/hold keyboard pedal. It can generate ordinary gate output (while pedal is held), toggle gate (first press set gate on, second sets off and so on) and logic combination of pedal states (exclusive NOR or AND, logic function is selectable by internal jumper). Pedals with both polaritites can be used (some pedals are normally open, some are normaly closed), pedal polarity is read at power up (pedals should be connected).

Width: 4TE/ 4HP/ 20mm
Depth: 40mm /1,6″ max.
Current: 30mA
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Dual Pedal Control