C-215 AHDSR – envelope w. hold segment (4HP)


DSCN6581_c-215C-2xx_knob_time_DSCN6582_c-215

 

C-215 AHDSR envelope generator (with hold segment) for Eurorack / Doepfer A100 system.

Gate input jack
Attack time, Hold time, Decay time, Sustain level (or Sustain time in selftrig mode) and Release time knobs
Envelope output jack + LED.

Internal jumper (1) for retrig from zero everytime = jumper set (incoming gate cause attack from zero regardless of actual output state, can cause pop)
Internal jumper (2) for self-triggering (looping) = jumper set. In self-trigger mode envelope triggers itself: Attack time, Hold time (holds max. envelope value), Decay time, Sustain time (!) – sustain level is fixed at 2/3 envelope value (3,3V at 5V env or 6,6V at 10V envelope output) and Release time.
Internal jumper (5/10V) for 5V envelope (jumper removed) or 10V envelope (jumper set=shorted).
P-060 – switches can be used for switching all settings from front panel.

Width: 4TE/ 4HP/ 20mm
Depth: 45mm /1,8″ max.
Current: 20mA (no need for +5V supply)
Power cable included

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

 

Order AHDSR envelope w. hold segment