M-053 3-ch Aux Mixer module for Eurorack / Doepfer A100 system.
From the top down:
in/out jacks (channel A)
in/out jacks (channel B)
in/out jacks (channel C)
ch A level knobs 1&2
ch B level knobs 1&2
ch C level knobs 1&2
mixed output jacks 1&2
The M-053 is 3-channel auxiliary effect send mixer. This module comes in handy if your mixer does not have auxiliary sends. It creates 2 separate send mixes from up to 3 inputs.
To use the M-053, patch a sound source into the A, B, or C section. The 2 jacks in each section are multed together, so you can patch from the other jack in that section to the normal input on your mixer. The 6 knobs below set the level of each input that is sent to 2 separate auxiliary send outputs (Out 1 and Out 2). Patch these 2 outputs to your effects modules.
The M-053 can also be used as 3-input standalone mixer, or to create a 3 channel subgroup. (Depending on the output impedance and buffering of your sound source modules, you can also try patching up to 6 sound sources into the available A, B, and C jacks.)
Width: 8TE/ 8HP/ 40mm
Depth: 40mm /1,6″ max.
Current: 35mA
Power cable included
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.