J-010 Joystick (12HP)

DSC_0664_j-010 DSC_0665_j-010 J-010R:

J-010 Joystick module for eurorack / Doepfer A100 system.

Independent (two) outputs for axis X and Y.
Range knob for voltage amount, Offset knob for voltage offset (“centering”) for both axes.
Two LEDs for every axis (easy voltage centering).
Spring centered (springs can be removed but front strong dust-protection rubber still slightly moves stick to center position so I suggest use all time centered with springs).
Industrial grade joystick.

If you´ll connect joystick outputs into my J-MATH J-011 module, you´ll get some math (additions and subtractions on independent outputs) and absolute value for Y-axis splitted into two outputs. With this function you can drive for example VCF frequency at upper joystick position and LFO frequency at lower joystick position or any other VC functions…

Width: 12TE/ 12HP/ 60mm.
Depth: 55mm /2,2″ max.
Current: 10mA max.
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Joystick