M-100 Unity mixer w. transpose (4HP)

Three-input unity mixer w. manual transpose.

Basicaly for CV mixing but can be used for mixing audio too (signal then can reach supply limits causing interesting clipping if large offset is set).

Input impedance standard 100kOhm (jumper set) or few MOhms (jumper removed), channel tracking trims, overall tracking trim, transpose knobs trim, knob jumpers for decreasing knob range (fine range can be set for none, one or both knobs). Knob transposing range about 0,5 to up 3 octaves up or down (depends on knobs range trim and knob jumpers). Three position switch for manual transposing.

Width: 4TE/ 4HP/ 20mm.
Depth: 50mm /2″ max.
Current: 25mA max.
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Unity mixer w. transpose