U-010 CV shifter/amplifier (4HP) – Discontinued

DSCN1345_shift-amp DSCN1346_shft_amp DSCN1344_3_harm_lag_ampshft

U-010 Amplifier/shifter utility module for eurorack / Doepfer A100 system. Replaced by U-012

Swiss knife for CV manipulation: offsetting (transposing) + changing CV slope (1V/oct to  0-to-2V/oct) + inverting (negative slopes…)

From top:
CV input jack
Offset coarse
Offset fine
Amplifying coarse
Amplifying fine
Normal/inverted output switch
CV output jack

Shifting about 2V (2 octaves), tracking (amplifying) up to 2x (1V CV input = 0-2oct output).
Output can be inverted by switch (inverted envelopes, inverted tracking -x oct/V or so…)

Width: 4TE/ 4HP/ 20mm.
Depth: 40mm /1,6″ max.
Current: 15mA max.
Power cable included.

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

No longer available, replaced by U-011 amplifier/shifter