M-216 Trig/gate to MIDI (8HP) – Discontinued


M-216 Trig/gate to MIDI (same note on 12 MIDI channels)

Discontinued – followed by M-217

12 gate/trig inputs (according to 12 MIDI channels) for triggering/playing same note for all inputs on MIDI equipment (on 12 channels).
(requested by my friend for triggering samples = playing notes on an old MDI HW sampler without remapping and some Elektron equipment too, this arrangement uses Volca Sample)
Active gate = note_on at fixed velocity 120, gate ends = note_off, simply simple :)

Short button press = halftone up transpose (common note for all inputs = MIDI channels)
Holding button = octave up transpose changes
Note setting is memorized.

Width: 8TE/ 8HP/ 40mm.
Depth: 45mm /1,8″ max.
Current: 20mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.