K-010 Utility CV Keyboard (8HP)



K-010 Utility CV Keyboard

One octave keyboard + transpose

4 options selectable by holding octup + octdn + “an tone button with label” together for more than 6s:

1. octave delay – if switched on, it changes octave only if an note button is active:
if you´ll change octave while holding an note button it changes octave immediately,
if you´ll change octave with no button active, new note will be played in transposed octave (1 or 2 octaves up/down)

2. octave gate – if switched on, it makes gate output active while holding an octave button too

3. octave temporary – it makes transposition of one octave up/down only if appropriate octave button is active,
keyboard is in mid position if no octave button is pressed (2-3V range, oct down is then 1-2V, oct up 3-4V)

4. priority – high/low note priority setting 

All functions can be triggered/gated from K-011 “Trig to keyboard” extension module

K-010 + K-011 review, thanks Astro Chicken!

K-012 Keyboard gates allows generating up to 14 manual gate outputs by buttons

Width: 8TE/ 8HP/ 40mm.
Depth: 60mm /2,4″ max.
Current: 25 mA max.
Power cable included.

Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

Order Utility CV Keyboard